Filter By:
- Bar Ends (11)
- BMX (30)
- Bottom Brackets (150)
- Brakes/Levers/Pads (431)
- Cables (112)
- Cassettes/Freewheels (106)
- Chainrings (177)
- Chains (107)
- Show More Categories
- Cranksets (197)
- Derailleurs (136)
- Forks (84)
- Groups (20)
- Handlebar Grips/Tape (219)
- Handlebars (140)
- Headsets (122)
- Pedals (198)
- Saddles (177)
- Seatposts (65)
- Shift/Brake Combinations (62)
- Shifters (99)
- Shocks (18)
- Stems (91)
- Other (1147)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
- Perforated leather handlebar tape
- Genuine perforated leather
- Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips
- Self Adhesive: Yes
- Tape Length: 215mm
- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution.
- Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.
- Comfort in an affordable first-class saddle.
- Padded with Slow Fit Foam, a memory foam that molds to rider's body.
- The foam matrix open cell structure confers increased elasticity and breathability to guarantee a durable and comfortable saddle
- Integrated Clip System (ICS)
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty.
Upper assembly features:
- Ultralight stem cap with integrated spacer plus an aluminum bolt and a star nut.
- 6, 15, and 25 mm stack height top cover options (6mm cover = 6mm total stack, 15mm cover = 15 total stack, 25mm cover = 25mm total stack).
- O-ring seal prevents water intrusion around the steerer tube.
- Custom-molded upper lip seal provides additional protection for the upper bearing.
$0.25
Replacement lower hardware for Rockshox forks.
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.90
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
- Compatible with Shimano HG40/50/70/90 chains
- KMC Z50, Z7, Z8, X8.93, X8.99 chains
- Reusable
- No Tool Required
- Pin Length: 7.3 mm
$2.00
FSA Mega Exo Small Parts.
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
$2.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$3.00
FSA Mega Exo Small Parts.
$3.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano E-tube Dummy Plugs
- Extra E-Tube plugs for sealing unused ports on shifters or junction boxes
- Sold each
$3.26
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$3.41
Bulk packaged, corrosion resistant stainless steel fasteners.
$3.41
Flat head screws from Wheels Manufacturing.
$3.47
Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing
$3.49 - $4.49
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head.
- Galvanized
- Pre-stretched
- Double ended
- Cable Head: Shimano/SRAM, Huret/Simplex
- Defined Color: Silver
- Diameter: 1.2mm
- Double Ended: Yes
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$3.49
Basics brake cables provide value on a budget.
- Pre-stretched
- Double ended for compatibility with SRAM/Shimano road and mountain brakes
- Color: Silver
- Diameter: 1.6mm
$3.57
Complete remotes and remote components for KS dropper posts.
$3.57
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.68
Campagnolo small parts for bottom brackets.
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.95
The Tanpan ferrule converts standard Tanpans to Tanpan inlines.
- Coverts Tanpan into Tanpan Inline
$3.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks.
- M12 bolt
$3.99 - $5.99
Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
Page 1 of 64
Next page