$349.99 $699.99 50% Savings
-Maximum realism training with a cycling trainer -Powerful: Can reach up to 1200 W. Simulates slopes of up to 20%. - Super stable: Telescoping legs offer greater stability when riding. -Silent
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
- Trainer Clutch Knob Upgrade/Replacement Kit - Compatible with all CycleOps Classic trainers that use an L bolt - Includes clutch knob, and L bolt.
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
CycleOps' Magnetic Remote Shifter is for use with CycleOps' standard Mag trainers. It allows you to adjust the resistance without leaving the saddle and fits on your stem or handlebars.
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
CycleOps' 20-/24-inch Wheel Adapter allows you to attach your BMX or recumbent bike to your trainer (sold separately). The adapter raises the resistance unit up for smaller wheels. It's compatible with CycleOps' Wind, Mag, Mag+, Magneto, and Fluid² trainers.
When you need to transport your trainer, CycleOps' Trainer Bag is the most convenient solution. There is no need to worry about your trainer getting damaged when it's safe and secure on the way to your race or event.
- Adapts a thru axel hub bike for a trainer. - Only compatible with current classic series trainers. - Fits most 142-148 Thru axle bikes with 1.0 or 1.75 thread pitch - Kit consists of an axle, washers, end caps with bolts and a shorter version of our bolt action slider for the classic series trainer. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems.
Use CycleOps' Training Mat to protect your floors and carpets from bike grime, sweat, and trainer wear. Durable and water proof, the Training Mat helps keep your trainer from moving across the floor and it absorbs vibration and noise.
With CycleOps' Rollers Fork Stand anyone can ride rollers! Just attach this little beauty to your rollers, clamp your fork in place, get on and ride. It's that simple. The Fork Stand mounts directly to the frame of your rollers for excellent strength and stability. No balancing is necessary, so you can watch television or read while riding your rollers!
CycleOps' Mag+ Trainer with Adjuster uses magnetic fields to generate a wide range of adjustable resistance, great for cyclists determined to stay in shape year round. Its unique design incorporates a flywheel for a smooth, quiet ride. Choose from 5 resistance settings for varied workouts. Plus, the bar-mounted remote shifter means you never break your cadence.
CycleOps' Magneto is an innovative training tool to keep you fit, trim, and ready to ride no matter what the weather is like outside. It offers progressive resistance, which means the faster you go, the quicker the resistance ramps up, just like the real world. There is no adjustment necessary, and the resistance level automatically changes to give you a smooth, quiet ride. Plus, the frame is tough, sturdy and stable so you can ride as hard as you want.
Feel the smooth precision of the lathe-turned-aluminum drums on CycleOps’ Aluminum Rollers. The durable steel frame stands up to years of hard training, indoors or out. Plus, the folding design allows convenient storage and transport. The rollers feature an adjustable belt for right and left dismounting, an easily adjusted wheelbase and a limited lifetime warranty.
CycleOps' Fluid2 Trainer utilizes Power Band technology to allow for distinct resistance changes without reaching to a lever on the unit. The large flywheel with fluid resistance delivers a smooth, realistic road feel while sturdy legs provide a stable platform for pumping out hard, 600-watt efforts and out-of-the-saddle climbs. A favorite among serious racers, the Fluid2 is easily transportable and stands up to repeated punishment by the burliest of legs for years of impressive performance.
Feel the smooth precision of the lathe-turned-aluminum drums on CycleOps’ Aluminum Rollers with Resistance. Five levels of resistance allow you to knock out hard efforts and the durable steel frame stands up to years of hard training, indoors or out. Plus, the folding design allows convenient storage and transport. The rollers feature an adjustable belt for right and left dismounting, an easily-adjusted wheelbase and a limited lifetime warranty.
Saddle up and prepare to workout the way you want, when you want, where you want. All you need is your bike, the Magnus, and your favorite virtual training software and device of choice. Integrated dual ANT+ FE-C and Bluetooth Smart technologies provide a quick connection to an array of virtual training software, while our fast-response electromagnetic response system puts you in control of every change in resistance, from 0 to 1500 watts. Top it off with the oh-so-sturdy Classic series indoor trainer frame, complete with CycleOps' innovative clutch knob, and you’ve got all the best features of a smart indoor trainer - without the hefty price tag. - Integrated dual ANT+ FE-C and Bluetooth 4.0 technologies. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - 1500 watt peak resistance - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings. - Comes on the CycleOps foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0 tire. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. Optional thru-axle adapter available for 142x12mm and 148x12mm. - Trainer tire recommended. - Compatible with a wide variety of devices and virtual training application, including CycleOps VirtualTraining, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth 4.0 devices ensures the Magnus is up to date. - Cadence sensor and ANT+ stick sold separately - Does not fit 650c wheel sizes, nor all 29er tires. - All CycleOps trainers are tested to the combined weight (rider and bike) of 300 lbs.
The Hammer Direct Drive Trainer redefines indoor training to create the ultimate riding experience. One that's versatile enough to handle the most intense interval sessions as it is the easiest of recovery rides. Simply put, the Hammer is the perfect addition to any athlete's toolbox. This direct drive style bike trainer eliminates the tire-to-roller contact, and is capable of replicating any outdoor ride from conversational group rides to rolling hills to pain face inducing 20% grades. All of this is done with a smooth, road-like-feel thanks to a massive 20 lb. precision-balanced flywheel that replicates real world inertia better than anyone else. Paired with our innovative, rapid response electromagnetic resistance system and you've got a bike trainer that can cover large resistance changes in a blink of an eye at a whisper quiet 64 decibels. Plus, the Hammer's revolutionary axle compatibility gives you the freedom to choose any thru-axle or quick release bike now and for years to come. Simply add a cassette, pop off your rear wheel, connect to your favorite virtual training software and prepare to Hammer away. - Noise level at 20 mph is 64 decibels, quiet enough to ride in a library. - PowerTuned using PowerTap technology for accurate power readings. - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Integrated dual ANT+ FE-C and Bluetooth 4.0 technologies. - Compatible with a wide variety of devices and virtual training application, including CycleOps VirtualTraining, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - 20 lb precision balanced flywheel provides quiet, vibration free and true-to-the-road riding experience. - Fast response electromagnetic resistance ensure most responsive resistance and maximum power available. - Robust design is capable of handling up to 2000 watts at 20 mph and can simulate up to a 20% climbing grade. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Integrated front wheel tray adds stability to ride without taking up any extra storage space. - Internally cooling technology ensures accurate ride data even during the hardest of workouts. - Integrated front wheel tray adds stability to ride and nests within the trainer when not in use. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Includes a Shimano splined freehub for compatibility with Shimano 8-11 speed cassettes. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates via Bluetooth 4.0 devices ensures the Hammer is up to date. - 300 lb (136 kg) maximum load – excluding bicycle. - Cassette not included. - Dimensions when Open L*H*W: 31”x18.5”x19.5” (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5”x18.5”x19.5” (76.2x469.9x495.3 mm). - Weighs in at 47 lb (21.3 kg).
JetBlack's Riser Block raises your front wheel to the same height as your rear wheel when on the trainer ensuring that your bike is level and stable. It's suitable for mountain and road bikes.
JetBlack's SweatNet protects your bike and floor from corrosive sweat during your hardcore trainer sessions. You are sweating, right?
Use JetBlack's Trainer Mat to reduce vibration and noise during trainer/roller sessions. It also protects your floor from sweat during your hardcore training. You are sweating, right?
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
While you reap the fitness benefits of your indoor suffer sessions, Kurt Kinetic's Sweat Guard collects the byproducts, keeping your bike's top tube clean and shiny. A five-inch Velcro opening at the center provides ample viewing of your handlebar- or stem-mounted computer.
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support. • Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
Kurt Kinetic's Floor Mat goes beneath your trainer and bicycle to keep your floors sweat-free, absorb vibrations and reduce noise. It's made of durable closed-cell PVC so it will stand up to years of intense training sessions. It rolls up for easy storage and portability and is easy to clean too.
If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.
Kurt Kinetic's Cyclone 2.0 Wind Trainer uses a dual fan design for road-like resistance and lasting durability. Two 2.2-pound fans deliver speed-sensitive resistance at any wattage or speed and a 5-second coast-down for a real-to-the-road experience. Plus, the Cyclone 2.0 boasts a wide, precision-machined roller to reduce tire wear, and a sturdy folding frame with a secure and easy-to-use bike mount.
Page 1 of 2 Next page