Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Roval Control SL Team Limited 29-inch Wheelset
$2,750.00
1,240 grams is obscenely lightweight when it comes to mountain bike wheelsets—the kind of weight that XC racers dream about—but light weight alone is no longer enough on today’s aggressive XC tracks. So, we sweated all the details and engineered the new Control SL Team LTD wheels to be sharp handling, smooth-riding, extra durable, and less prone to pinch flats. Oh yeah, they’re also some of the lightest production wheels on the planet. We didn’t pull any punches creating the Control SL Team LTD. Built around the lightest hubs Roval has ever made, its completely new rim design with a 29mm internal width provides a better tire profile for improved traction and ride quality. An all-new bead-hook design with wider hooks results in a flat profile that not only offers greater impact strength by distributing impact force over a larger area but also increases the impact force needed to pinch flat by 22 percent. Finally, offset spokes and an asymmetric rim profile paired with two-cross lacing not only provides a better bracing angle for increased lateral stiffness but allows for the use of a single spoke length across the entire wheelset. The end result is a featherweight XC race wheel that excels everywhere from the racecourse to the backcountry. Incredibly low weight matched with above-category toughness and durability, razor-sharp handling, and exceptional ride quality brings out the very best in modern mountain bike performance. Available in very limited numbers, the Control SL Team LTD is meticulously hand-built and finished with a special graphic treatment. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design. Cobalt Blue Metallic graphic under clear coat. - Rim Width: 29mm internal - Roval Engineered Control SL hubshells have a single spoke length for each wheelset. - Bearing Type: SiNC Ceramic Sealed cartridge - Assembly Method: Hand-built - Every wheel includes custom anodized tubeless valve stems and individual spoke hole plugs to make tubeless set-up easier. - Total Wheelset Weight: 1240g
Zipp Super-9 Disc Carbon Rear Wheel (Clincher)
$2,731.00
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
Shimano Dura-Ace R9100 C60 Carbon Tubular Wheelset 700c
$2,504.99
Shimano's Dura-Ace C60 Carbon Tubular wheelset provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim
Roval Terra CLX Evo 650B Wheelset
$2,500.00
Where in the world can you ride these brutes? Anywhere you damn well please. Road light, off-road tough, smooth as butter, Terra CLX EVO wheels bring leading-edge performance to the diverse needs of aggressive gravel rides. Available in 700c and 650B with 30mm internal-width rims to deliver optimal handling with up to 2.1-inch tires, so you’re the master of any terrain. Durability delivered through unsurpassed toughness-to-weight, thanks to leading composite technology rims. Lifetime warranty and no-fault crash replacement. - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 30mm - Rim Depth: 25.3mm - Front Spoke Pattern: Radial/Two-cross (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: Front/Rear: 24/24 - Spoke Type: DT Swiss Aerolite T-head - Nipple Type: DT Swiss Pro Lock Alloy hexagonal - Spoke Length (front): 650B Right/Left: 264mm/260mm - Spoke Length (rear): 650B Drive-Side/Non-Drive: 259mm/265mm - Front Hub: Roval AFD1, Center Lock, 12mm thru-axle end cap - Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano or SRAM XDR, 142x12mm thru-axle end cap - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed)
Roval Terra CLX Evo 700c Wheelset
$2,500.00
Where in the world can you ride these brutes? Anywhere you damn well please. Road light, off-road tough, smooth as butter, Terra CLX EVO wheels bring leading-edge performance to the diverse needs of aggressive gravel rides. Available in 700c and 650B with 30mm internal-width rims to deliver optimal handling with up to 2.1" tires, so you’re the master of any terrain. Durability delivered through unsurpassed toughness-to-weight, thanks to leading composite technology rims. Lifetime warranty and no-fault crash replacement. - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 30mm - Rim Depth: 25.3mm - Front Spoke Pattern: Radial/Two-cross (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: Front/Rear: 24/24 - Spoke Type: DT Swiss Aerolite T-head - Nipple Type: DT Swiss Pro Lock Alloy hexagonal - Spoke Length (front): 700c Right/Left: 283mm/279mm - Spoke Length (rear): 700c Drive-Side/Non-Drive: 278mm/284mm - Front Hub: Roval AFD1, Center Lock, 12mm thru-axle end cap - Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano or SRAM XDR, 142x12mm thru-axle end cap - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed) - Weight (with rim tape and tubeless valves): 700c: 1357g
Specialized Roval 321 Disc - Disc Brake 700c Rear
$2,500.00
Making up about 50% of your total race time, the bike portion of a triathlon is where equipment choices can make the difference between first and fifth, and no other equipment choice will save you more time than a disc wheel. While traditionally-shaped disc wheels are faster than their spoked counterparts, the Roval 321 Disc for disc brakes turns conventional design on its head, creating the fastest wheel on the planet. Disc wheels often fall into two categories—a completely flat shape, with structure coming from carbon fiber and a honeycomb-foam filling, or a spoked wheel that's been faired with a carbon fiber cover. In our quest to break traditions, the 321 uses a single layer of 1k carbon fiber on each side of the wheel, and it all comes together at the brake track bridge. This kind of carbon fiber is rarely used in bicycle components due to its high manufacturing cost, but it offers a bevy of performance benefits. This coveted carbon is much lighter than other layups, like 3k and 12k, and it can only be laid by the most skilled of carbon fiber craftsmen. It's complicated, but the payout is worth it, as it delivers a supple ride and one of the lightest disc wheels available. And in the real world, this means that it'll spin-up quickly and reduce fatigue over the length of the course. Stiffness is often the “hot-topic” in the disc wheel world, but we think it’s an interesting conversation. It's long been thought that efficient power transfer and high stiffness are directly correlated, but through extensive field-testing, we've determined that this isn't the case at all. In fact, our initial disc was so stiff that, under power, it wouldn't flex with the frame and this caused brake rub. This wrongly creates the perception of a flexy wheel, when really, the wheel is actually too stiff. In order to solve the brake rub problem, we first designed our optimal aero shape and then worked on our internal stiffness targets to fit within what we consider to be a desirable frame stiffness. And while light overall weight was a development priority, our focus was aerodynamics. Through hours of Computational Fluid Dynamics (CFD) and testing in the Win Tunnel, we developed a never-before-seen shape that's optimized to work with a tire for on-bike airflow. What this translates to is an all-carbon disc wheel that, on the non-drive-side, has a shape that's as aerodynamic as our current understanding allows, and a drive-side shape that's as aerodynamic as the wheel-dish and derailleur clearance will allow for. To save every possible watt, we've also added CeramicSpeed bearings and DT Swiss 240 hub internals into our hub. Each 321 Disc wheel is also 2Bliss Ready right out of the box and comes with a padded wheel bag, quick-release, and tubeless valve stem. Designed for the most uncompromising athletes in the world, with engineering to match, the 321 Disc is the world's most advanced disc wheel for your race against the clock. - Rim Type: Full carbon clincher, 2Bliss Ready - Rim Material: Carbon - Braking Surface: Disc brake only - Rim Depth: Solid Disc - Rim Width: 19mm internal, 27.3mm external (at brake track) - Rear Hub: Roval Disc 142x12mm, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Assembly Method: Handmade - Extras: Roval padded wheel bag, Roval tubeless valve, Roval valve pocket covers - Weight: 1015g
Shimano Dura-Ace R9170 C40 Carbon Tubular Wheelset 700c
$2,441.99
The lightweight Dura-Ace C40 Carbon Tubular disc-brake wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubular-specific rims - Center-lock Disc - E-thru axles
Shimano Dura-Ace R9100 C40 Carbon Tubular Wheelset 700c
$2,399.99
The lightweight Dura-Ace C40 Carbon Tubular wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - Responsive acceleration - Wide section rim - Carbon laminate rim
Shimano Dura-Ace R9170 C40 Carbon Tubeless Wheelset 700c
$1,966.99
The lightweight Dura-Ace C40 Carbon Tubeless disc-brake wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubeless - Center-lock Disc - E-thru axles
Roval Control SL 29
$1,900.00
What you're looking at here is gravity's nemesis: Roval's Control SL 29 Wheelset. At 1,320 grams, you'll climb XC courses with ease on these lightweight, hookless-bead, carbon hoops. They're built to withstand grunting up climbs, descending with abandon, and blasting in and out of corners with Specialized carbon rims, DT Swiss spokes, and DT Swiss's legendary 240 rear hub internals. And, for easy versatility, the front hub is compatible with 15mm thru-axles. Plus, these sweet race-ready wheels are tubeless-compatible so you are ready for anything that the trail throws at you.
DT Swiss XMC 1200 SPLINE 30 29-inch Rear
$1,606.90
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence. - SRAM XD MTB cassette-compatible
Roval Alpinist CL Wheelset
$1,600.00
Lighten Your Bike, Not Your Wallet. Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - DT Swiss 350, Center Lock, Sealed Cartridge bearings, DT Swiss Star Ratchet internals,142x12mm thru-axle compatible - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 24F and 24R - Spoke Pattern: Two-cross (1:1) Front and Rear - Spoke Type: DT Swiss Aerolite T-head - Weight: Front - 601g; Rear - 764g
Specialized Roval Traverse 38 SL Fattie 27.5 148
$1,600.00
While there may be a linear relationship between increased tire size and increased fun, this relationship only holds true when wider tires are paired with the correct width rims. Having a 2.8", or high-volume, tire mated to a narrow rim makes for a squirmy, poor handling experience, and when you’re on the hunt for additional fun, these characteristics are undesirable. Lucky for you, the new age of traction, stability, and speed has arrived—and its name is the Traverse 38 SL Fattie 27.5. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. While our 38-millimeter Traverse SL is already wider than most offerings, the benefits of three-inch tires become more apparent with a proper rim interface. In search for the proper width, our engineers tested various iterations, from 30 to 45 millimeters, to determine where the sweet spot lies. What they ended up with is a 38-millimeter internal rim width that turns the Traverse 38 SL Fatties into descending machines. A wide internal rim width endows riders with a variety of advantages that are exemplified even more with plus-sized tires. The extra width allows for more tire volume, translating into more supple ride qualities, and better support for the tire, meaning that you'll experience less "burping" when riding tubeless and a drastic increase in traction. After determining the proper rim width for the plus-sized application, we began designing the rim using the same low-weight, high-strength technologies used in the Traverse SL and the Control SL. With this, we started with our Zero Bead Hook design that effectively eliminates the biggest weak spot found in traditional rims, and topped it off by using high-modulus carbon fiber to keep the weight down. And to further this theme, the wheels also include the Roval tubeless plug system, which sheds an additional 50 grams-per-wheel compared to a rim strip Each Traverse 38 SL Fattie is hand-built to our own alloy hubs with DT Swiss Competition Race spokes. Inside our hubs, you'll find sealed cartridge bearings all-around, and a quick-engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a decent job of building wheels, we choose professionally trained humans to build ours, as they catch various flaws that a machine would otherwise miss.
Specialized Roval Traverse SL Fattie 27.5 148
$1,600.00
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flick'able, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
Shimano Dura-Ace R9100 C40 Carbon Clincher Wheelset 700c
$1,579.99
The lightweight Dura-Ace C40 Carbon Clincher wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - Responsive acceleration - Wide section rim - Carbon laminate rim
Roval CLX 64 System Wheels
$1,300.00 - $1,500.00
Developed in Specialized's Win Tunnel and designed to interface with the world’s fastest tire, the S-Works Turbo, the Roval CLX 64 is the fastest road race wheel/tire system Specialized has ever developed. The 20.7mm tubeless-ready internal rim width further increases tire volume, in turn creating a larger contact patch. Specialized's wheel system comes complete with the S-Works Turbo tire, which measures 24mm wide for enhanced stability and traction in corners and on descents. Throw these on and watch the competition flail helplessly in your wake.
DT Swiss ERC 1400 Spline 47
$1,441.90
Our benchmark-setting Aero+ rim matched to a punchy mix of top end aerolite and laced to premium Ratchet System hubs makes for a wheel that delivers in all riding situations. Fitting 28mm tires on its wide rims will give you all the comfort and grip needed for extended rides on mixed surfaces. At the same time, in combination with 25mm rubber, the ERC 1400 SPLINE will aero optimize your race bike, ready for you to set your own, new benchmarks.
Roval Alpinist CLX Rear
$1,400.00
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty. - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings, DT Swiss EXP internals, HG Freehub, 142x12mm thru-axle compatible - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 24 - Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 686g
Roval CLX 50 Disc Clincher Rear
$1,375.00 - $1,400.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that’s where the all-new CLX 50 comes in. When we set out to create the CLX 50 Disc, we had clear goals in mind—create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, take some aero guidance from the CLX 64, and keep all of the disc brake benefits that we've come to love if we were going to create what we like to call “the unicorn wheel." Why discs you ask? With our disc-specific rims, we ditch the brake track making for a stronger, more impact-resistant rim. This way, you get a disc-specific carbon layup that optimizes stiffness, a weight as close to its rim-brake brethren as possible, and incredible brake modulation and power in all conditions. Even though the CLX 50 is similar in weight to many wheels in the “lightweight” category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC-machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. After finding the optimized rim shape that best supported our svelte weight requirements, we opted to lace the rims to our Aero Flange (AF) hub, via 24 DT Swiss Aerolite spokes, which features the legendary CeramicSpeed bearings. This way you get a complete, superior wheel system—not just a quick rim. And at the end of the day, it all amounts to a 50mm-deep, 770-gram rear wheel that's not only significantly lighter than the competition’s similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category.
Roval Control SL 29 6B Rear Wheel
$1,400.00
Control SL The racer's edge, a bulletproof featherweight Packing all the Team Edition features into a more widely accessible wheelset, the Control SL sets a new standard for XC performance. An all new, designed from the ground up, asymmetric rim is laced via equal length straight-pull DT Swiss spokes to the lightest hub Roval has ever made. - Assembly Method: Hand-built - Bearing Type: SiNC Ceramic Sealed cartridge - Every wheel includes aluminum tubeless valve stems and individual spoke hole plugs to make tubeless set-up easier. - Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14mm 2.0mm - Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 54t quick engagement ratchet system cassette, includes SRAM XX1 11-speed freehub and 148 end caps. - Rear Spoke Pattern: Two-cross - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design. Cobalt Blue Metallic graphic under clear coat. - Rim Width: 29mm internal - Roval Engineered Control SL hubshells have a single spoke length for each wheelset. - Spoke Count: 24h Rear - Spoke Type: DT Swiss Aerolite Straightpull T-head 294mm - Wheel Weight: 676g
Roval Terra CLX 700c Rear Wheel
$1,400.00
One wheel to rule all roads. Road light, off-road tough, smooth as butter, Terra CLX wheels bring leading-edge performance to the diverse needs of mixed-terrain rides. These are the lightest gravel wheel on the market. They sport 25mm internal-width rims, deliver a durable and exceptionally smooth ride, are compatible with 28-42mm tires at up to 90 PSI, and they come with a lifetime warranty and no-fault crash replacement. - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 25mm - Rim Depth: 32mm - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: 24 - Spoke Type: DT Swiss Aerolite T-head - Nipple Type: DT Swiss Pro Lock Alloy hexagonal - Spoke Length: Drive-Side/Non-Drive: 272mm/277mm - Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano HG, 142x12mm thru-axle end cap - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed) - Wheelset Weight (front and rear with rim tape and tubeless valves): 1296g
Roval CLX 50 Clincher Wheels
$1,099.99 - $1,399.99
Specialized's CLX 50 full-carbon clincher is the perfect all-around race wheel, proven by multiple grand tour wins. The aerodynamic, optimized rim shape slices through the wind while preserving the confident, stable handling of a box section rim. A wide internal rim width provides an optimal tire profile for incredibly precise handling and stiffness.
Roval CLX 32 Disc Wheels
$1,099.95 - $1,399.95
The Roval CLX 32 Disc full-carbon clincher is the perfect performance disc wheel; light, stiff, and fast. The wide internal rim width provides an optimum tire profile for precise handling, stiffness, and aerodynamics. The Center Lock hub makes this an ideal wheel for the muddiest cross-race or fast paced ride. This wheel offers a non-SCS rear hub for traditional QR or 12mm thru-axle compatibility.
Shimano Dura-Ace R9170 C60 Carbon Tubular Rear 700c
$1,362.99
Shimano's Dura-Ace C60 Carbon Tubular disc-brake wheel provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubular - Center-lock Disc - E-thru axles
Shimano Dura-Ace R9100 C60 Carbon Tubular Front 700c
$1,339.99
Shimano's Dura-Ace C60 Carbon Tubular wheel provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim
Shimano Dura-Ace R9170 C40 Carbon Tubular Rear 700c
$1,304.99
The lightweight Dura-Ace C40 Carbon Tubular disc-brake wheel is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheel has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubular-specific rims - Center-lock Disc - E-thru axles
Shimano Dura-Ace R9100 C40 Carbon Tubular Rear 700c
$1,281.99
The lightweight Dura-Ace C40 Carbon Tubular wheel is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheel has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - Responsive acceleration - Wide section rim - Carbon laminate rim
Roval C38 Disc Wheelset
$1,200.00
Roadies all drool over carbon wheels, but the price tag often puts them out of reach. The new C 38 Disc wheels break down this barrier while bringing reliable, high performance carbon road wheels to the masses. With the C 38, we developed an all-new, lightweight, and durable carbon rim with the modern features that savvy riders demand, and then we paired it with trusty DT Swiss components, like DT 350 rear hub internals and Competition spokes, for a build that ticks all the boxes on your wish list. The new C 38s are the perfect depth (38mm), too, so they'll feel at home on everything from gravel bikes, to aero bikes, and everything in between. - Rim Type: Carbon clincher, 2Bliss Ready - Rim Material: Carbon - Braking Surface: Disc brake only - Rim Depth: 38mm - Rim Width: 21mm internal, 26.6mm external - Front Spoke Pattern: Two-cross/Radial - Rear Spoke Pattern: Two-cross/Two-cross - Spoke Count: 24 front, 24 rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Pro Lock Brass hexagonal - Front Hub: DT Swiss 350 Disc for Roval, 100x12mm, Center Lock - Rear Hub: DT Swiss 350 Disc for Roval, 142x12mm, Center Lock, 11-speed - Assembly Method: Hand-built - Extras: Roval tubeless tape and tubeless valves - Total Wheelset Weight: 1,560g
Roval Roval Control 29 Carbon 148
$1,200.00
It’s not often that “affordable” and “carbon” appear in the same sentence, but our Control 29 Carbon wheelset was designed to change that. Utilizing many of the same techniques used in the development of the SL iteration of the Control 29, these wheels provide the lightweight XC performance you need at a more attainable price. Creating a successful XC wheelset isn't as easy as you might think. Often times, keeping a wheel light, stiff, and strong requires an unlimited budget. So when we were asked to create a wheel that had low inertia and weight, but was also affordable, strong enough to take on rocks and roots, and wide enough to optimize traction and rolling resistance, we knew that we had our work cut out for us. We started with the notion of keeping these wheels as close to their SL brethren as possible. And with this, we explored what made the SLs so awesome in the first place, and then we implemented nearly every aspect of them. Starting with the rim, we kept our renowned Zero Hook Bead that allows for continuous fiber layup across the sidewall and rim bed. We then paired it with a wide 25-millimeter internal profile that makes it resilient to impact and creates a tire profile that’s conducive to low rolling resistance and incredible traction. On the trail, these technical traits translate to a wheelset that many XC riders have grown to love—quick accelerations on punchy climbs, swift stopping that lets you leave braking till the last second, and unprecedented reliability. Combine this with the easy to set up our 2Bliss Ready system and you have a reliable XC wheelset that’s as easy to climb on as it is to work on. To go along with the rim, we made sure to keep the lightweight, reliable, and affordable features in mind when building the wheelset, so we took DT Swiss 350 Classic hubs (15x110mm thru-axle front / 12x148mm thru-axle rear) and hand-laced them with 28 DT Swiss Competition Race spokes. Finding hand-built wheels is becoming more and more difficult, but we're fully invested in the power of the human touch. When a wheel is machine-built, there are certain margins of error that are built into the system that result in inconsistencies. With a real person building your wheels, however, you're sure to get a wheelset that's free of imperfections. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design, black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD end caps. - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, 12x148mm, includes SRAM XX1 XD freehub. - Includes 31mm OD end caps for front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1610g
Roval CLX 64 Disc SCS System Rear Wheel
$1,193.95 $1,375.00 13% Off
Developed in Specialized's Win Tunnel, and designed to interface with the world’s fastest tire, the S-Works Turbo, the Roval CLX 64 Disc is one of the fastest disc brake road race wheel/tire system ever developed. The SCS hub allows for a proper chainline on short chainstay performance road and 'cross bikes. This wheel system comes complete with the S-Works Turbo tire which measures 24mm wide for enhanced stability and traction in corners and on descents. This rear wheel uses an AFD1 SCS Center Lock aero hub that's compatible with a QR or 12mm thru-axle.
Page 1 of 10 Next page